Safety gate

Home » Products » Safety gate

Most important features for self-closing gates:

  • Must be strong enough to protect a person falling against the gate 
  • Must always fall back in closed position after passing through 

The Intrepid safety gates are made from a special designed polyurethane. The special properties of this PU make the self-closing gate unique. The Intrepid safety gate, is the only PU-gate withstanding the 50 kg TÜV-test. Even after 30 years of exposure in corrosive environments, the Intrepid safety gate will still offer optimal protection. And all of this; without maintenance.

Our strength is your safety!

From the start in 1980, the Intrepid safety gate has been tested on impact. Since the self-closing gates need to protect people against accidental falls through a guardrail opening, an impact test is essential. We are very pleased that the new European standard EN ISO 14122, released on July 1, 2016, recognizes the importance of this impact test for non-metal guardrails and safety gates. Our gates are tested by TÜV.

We are setting the standard instead of following! This makes the Intrepid gate unique and allows us to guarantee safety.

The Intrepid gate compared with 2 other PU gates.

We stand behind our products and guarantee your safety.

Description

  • Gate automatically closes by gravity
  • Returns closed when released
  • Design does not depend on springs, cams, bearings, or the operator
  • Gate has a horizontal swing, not a vertical drop
  • Available in 4 sizes: Opening (mm/inch) between posts specifies size.
    UDG-22  (22″/560 mm)
    UDG-27  (27″/690 mm)
    UDG-32  (32″/820 mm)
    UDG-37  (37″/950 mm)

Benefits 

There are many benefits to using our swing gates.

BUT, only one thing matters: You need a gate that works!

The Intrepid safety gate is reliable, maintenance free, and at a low cost. 

We solve your problem once and for all. First see and then believe?

Engineering

For engineering purposes, we have 3D files and a TEKLA plugin available. The TEKLA plugin is an application for modelling Intrepid Safety Gates. With only a few clicks you generate the right gate for the right opening. It also generates a list of gates used for your project.

Accessories

Round Tube kit

Flat Bar Kit

Square Tube Kit

Magnet Closure Kit

The European standard EN ISO 14122 advices to hold safety gates in closed position, but not locked. We strongly advice to use our Magnet Closure Kit at:

  • Offshore
  • Windy areas
  • Cranes
  • Ships
  • Modular transit

Downloads

Installation on angle post

Installation on round tube

Installation on square tube (clamp connection)

Installation on square tube (bolt connection)

Installation on strip (clamp connection)

Dimensions mm/inch

Magnet Closure Kit

Want to know more about our Safety Gate and other products? Don’t hestitate to contact us using the button below. Contact us

GET IN TOUCH

Do you need a quote or some more information about or products?

Contact us